Bit definition The drill bit is the main tool of mining engineering impact drill, drilling and drilling machine parts is matched with the company, the product adopts the high quality alloy bit Zhuzhou hard alloy factory, the carcass quality 40Cr, 42CrMo and other materials Seiko production, to ensure the strength and toughness of drill bit. The company launched the conical connection hard alloy drill bit are straight and cross, three blade, ball gear and other four kinds of forms, many varieties and specifications.
Manufacturer Price Small Hole Drilling Tools 6 Degree H25 30mm/32mm/34mm/36mm/38mm/40
• Suitable for small hole range
• Widely used in Dimensional Stone Quarrying Industry
• Widely used in Underground Mining Industry
| Tapered drilling tools Types |
Diameter
(mm) |
Taper Angle
(Degree) |
Skirt |
Weight
(kg) |
| Tapered chisel bits |
26-80mm |
7°,11°,12° |
Normal, Length |
0.15 - 0.45 |
| Tapered cross bits |
32-60mm |
Normal, Length |
0.18 - 0.7 |
| Tapered button bits |
30-55mm |
Normal, Length |
0.2 - 0.5 |
The usage method and matters needing attention of drill bit
1. Ensure a good match with the tapered drill rod (taper is consistent, the depth of the drill rod inserted into the drill hole must be more than 25mm, and the head of the drill rod should not be filled with the bottom of the drill hole, otherwise it is easy to cause the loss of the drill bit; Note: it is best to use the drill bit with the same tapered drill rod manufacturer to ensure that its taper is consistent and well coordinated.
2. the drilling machine should lower the air volume and reduce the damage to the bit caused by high stress on the cemented carbide sheet, and then use the normal air rate when the drill bit is fully drilled into the rock;
3. When the width of the platform is more than 3mm, it should be replaced or milled in time to avoid reducing the drilling speed, causing bit fragments, splits and reducing service life; When the taper of the bit appears, it is necessary to replace or repair the bit in time, otherwise, the bit will be worn seriously, the drilling speed will be reduced, and even the drill bit will be stuck. Use 46-60 silicon carbide grinding wheel when grinding, its line speed is not less than 18 m / s.
4. When using brazing bit, if it encounters foreign body such as steel bar, the drilling position should be adjusted to prevent the bit from being destroyed;
5. When rock drilling is easy to appear, one character bit should be replaced by cross bit or ball bit.
6. for the rock which causes serious wear of drill bit, slow drilling and serious debris, consideration should be given to replacing other alloy grade bit or using cross type bit and ball bit, and notify us in writing in time. In order to deal with in time.
| Name of Produce |
Dia.(mm) |
Tip Size(mm) |
Taper |
Weight(kg) |
| H*W |
| single-chisel bit |
26 |
12*6 |
7° |
0.19 |
| 28 |
12*8 |
7° |
0.20 |
| 32 |
14*8 |
7° |
0.22 |
| 34 |
14*8 |
7° |
0.27 |
| 36 |
15*10 |
7° |
0.33 |
| 38 |
15*10 |
7° |
0.36 |
| 18*10 |
7° |
0.36 |
| 14*9 |
7° |
0.36 |
| 14*8 |
7° |
0.36 |
| 40 |
15*10 |
7° |
0.38 |
| 18*10 |
7° |
0.38 |
| 14*9 |
7° |
0.38 |
| 14*8 |
7° |
0.38 |
| 43 |
15*10 |
7° |
0.40 |
| 18*10 |
7° |
0.40 |
| 14*9 |
7° |
0.40 |
Congratulations, you have found the source manufacturer. YK Drilling Tools produces water well drilling rigs, drill pipes and matching drill bits. Various types of drilling tools can be customized.
Contact us immediately to understand your drilling needs.
FAQ
The information you may like to know before order:
1. Are you a manufacture or a trade company?
We are a professional manufacturer.
2. Handling time for an order
Based on order quantity, normally it takes 25 days for production.
Only 2 or 3 days if we have stock on your request size.
3. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.
4. After Services:
1. Our sales team will response for your question within 24 hours (Holidays Excluded).
2. Technical Support will be available in any time.
3. Free replacement will provide once the failure confirmed caused by our product quality.
5.Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight.
6.Do you have quality control system?
Yes, we check every production process and test pressure for each tool to make sure no problem.
7.How can I get a brochure and buy your products?
Very easy!Please leave me a message and tell me your requirements, let me know you are interested in our products. Will talk to you about the details shortly.
8.Can you tell me your size and specification?
1.Give me your drawing with detail requirements.
2. Give me the product no.after you checked our booklet.
3. Don't forget to tell me the quantities, this is very important.
4. Give me your size and specifications.
5. Your destination port.
Save worry and effort, enjoy low price!!
This price is a reference price, and the final price is subject to the official negotiation result of the buyer and the seller!
• Suitable for small hole range
){kind=link}