Auger Bit Bullet Teeth Carbide Teeth Directional Drilling

• Customization: Available
• Customized: Customized
• Standard: ISO
• Model NO.: Customization
• Type: Center Drill Bit
• Material: Tungsten Carbide
• Usage: Well Drilling
• Transport Package: Wooden Box
• Specification: c3050
• Trademark: YIKUANG
• Origin: China
• HS Code: 8207191000
• Production Capacity: 10000

Product Description

auger bit bullet teeth carbide teeth directional drillingCutter & Pick

The pick is a part of shearer, roadheader and rotary excavator. It is one of the vulnerable parts in coal mining and roadway driving machinery, and is the main tool for coal falling and coal crushing. Among them, the shearer pick model is represented by "U", the roadheader pick model is represented by "S", and the rotary excavator pick model is represented by "C".
Commonly used materials Judging from the imported and domestic picks actually used by some domestic coal mines, the cutter body materials are mostly 42CrMo, 35CrMnSi and other steel grades, and some coal mines use the newly developed Si-Mn-Mo series quasi-bainitic steel. The coal industry pick standard for heat treatment process stipulates that the hardness of the pick body is 40-45HRC, and the impact toughness is not less than 49J/cm2. During the machining process, the material of the pick body should meet or exceed the required mechanical properties through heat treatment.
   Mining picks are subjected to high periodic compressive stress, shear stress and impact load when cutting coal and rock. Although the hardness of coal is not high, it often encounters hard minerals such as coal gangue. Friction and impact will also cause the temperature of the pick to increase. For the pick to work under such complex industrial and mining conditions, it is required that the pick body should have both wear resistance and good impact resistance.
The pick is mainly composed of a pick handle, a pick head, and an alloy cutter head. The pick handle and the pick head are often called the pick body. There are many types of mining picks, and the general structure is that a carbide tip is inserted on the quenched and tempered low-alloy structural steel cutter body.

Processing technology: The tooth body of the coal pick is made of high-strength alloy steel after heat treatment to maintain strong toughness and wear resistance; all the circlips are made of high-strength spring steel, which has good wear resistance. The head of the coal pick adopts isothermal quenching process, and the hardness is not reduced. The cemented carbide adopts YG13C processed by domestic regular manufacturers, and the quality is stable. Welding wear-resistant layer can be added according to customer needs. The hardness reaches more than 65 degrees.
Product Usage
Application field: Mainly used for coal mining and roadway, tunnel, ground ditching and other projects. Mainly equipped with shearer, roadheader, milling machine and other equipment.

category	Model	Height(mm)	Diameter (mm)	Alloy size(mm)	Tooth sleeve diameter(mm)
Shearer Pick	U47	Φ157	Φ64	Φ19	Φ30
		Φ157	Φ64	Φ14	Φ30
	U82	Φ152	Φ50	Φ22	Φ30
		Φ152	Φ50	Φ19	Φ30
	U84	Φ139	Φ55	Φ16	Φ30
		Φ142	Φ50	Φ16	Φ30
		Φ142	Φ50	Φ19	Φ30
	U85	Φ161	Φ50	Φ16	Φ30
		Φ195	Φ55	Φ16	Φ35
	U94	Φ183	Φ55	Φ22	Φ35
		Φ178	Φ54	Φ19	Φ35
		Φ182	Φ55	Φ19	Φ35
	U95	Φ182.5	Φ54	Φ23	Φ35
		Φ180.5	Φ54	Φ23	Φ35
		Φ182.5	Φ54	Φ23	Φ35
		Φ128.5	Φ54	Φ23	Φ35
	U170	Φ222	Φ62	Φ25	Φ35
		Φ222	Φ82	Φ25	Φ35
		Φ222	Φ62	Φ22	Φ35
		Φ222	Φ62	Φ23	Φ35
Category	Model	Height(mm)	Diameter (mm)	Alloy size(mm)	Tooth sleeve diameter(mm)
Roadheader Pick	S100	Φ141	Φ53	Φ22	Φ33.7
		Φ143	Φ53	Φ13	Φ33.8
		Φ143	Φ44.5	Φ12	Φ33.5
	S120	Φ153	Φ70	Φ22	Φ38
		Φ139	Φ55	Φ22	Φ30
		Φ139	Φ50	Φ17	Φ30
	S135	Φ155	Φ64	Φ25	Φ38
		Φ157	Φ62	Φ25	Φ38
		Φ155	Φ65	Φ23	Φ38
		Φ166.5	Φ65	Φ25	Φ35
	S150	Φ166.5	Φ65	Φ23	Φ38
		Φ153	Φ70	Φ25	Φ38
		Φ153	Φ70	Φ22	Φ38
	S160	Φ149	Φ61	Φ27	Φ30
		Φ150	Φ65	Φ22	Φ30
		Φ149	Φ61	Φ17	Φ30
		Φ149	Φ61	Φ22	Φ30
	S260	Φ156	Φ80	Φ34	Φ37.5
		Φ164.5	Φ65	Φ27	Φ38
		Φ165	Φ65	Φ25	Φ38
Category	Model	Height(mm)	Diameter (mm)	Alloy size(mm)	Tooth sleeve diameter(mm)
Rotary Excavator Pick	C31/25-12H	118	Φ33	Φ12	φ25
	C34/25-19H	118	Φ47	Φ19	φ25
	C35/25-16H	142	Φ47	Φ16	φ25
	C36/25-18H	141	Φ47	Φ18	φ25
	C50/30-19H	130.5	Φ50	Φ19	φ30
	C55/30-19H	130.5	Φ55	Φ19	φ30
	C50/30-20H	130.5	Φ50	Φ20	φ30
	C60/30-20H	130.5	Φ60	Φ20	φ30
	C50/30-22H	130.5	Φ50	Φ22	φ30
	C60/30-22H	130.5	Φ60	Φ22	φ30
	C50/30-25H	130.5	Φ55	Φ25	φ30
	C55/30-25H L	150	Φ55	Φ25	φ30

FAQ:

Q: Are you a manufacturer or trading company?

A: We are a specialized manufacturer.

 

Q: What are your main products, and used for?

A: Our products include core barrel, casing, drill rod, drill rig and other drilling parts.They are used for mineral exploration, geological drilling,

 

Q: How about the delivery terms?

A: 1.Payment: T/T, L/C, Western Union, Paypal, 30% deposit in advance and rest before delivery

2. Min. order quantity: 1 piece.

3. Transportation: By sea, train.

 

Q: How about discount?

A: Price is based on products and order quantity.

 

Q: Do you accept sample order?

A: Yes sure, please contact us for details.

 

Q: How about your after-sales service?

A: As a manufacturer has 32 years of history we offer prompt technology support for all problems and questions. Besides, we accept goods return or replace for quality problem.

 

Q: Where is your factory located in?

A: Our factory is located in Linqing city, Shandong province, China.

 

Q: How does your company control the quality?

A: Quality first. In order to guarantee high quality for our products, our always make a serious inspection for all products and raw materials in strict procedure.

We have obtained certificate of ISO9001*Yikuang is professional production of drilling tools, if you want to know more about our products, please feel free to contact us.